Then, another dialog asking if you want to save HyperTerminal settings appears. Ī dialog asking if you want to disconnect the terminal appears. When the settings are complete, click in main menu of HyperTerminal and click. (If the login screen is not displayed, press the Enter key several times) Refer to its user manual to set the device. The login screen of the Ethernet Switch appears. Then, click the "Settings" tab at the upper part of the window to switch the tab, click the pull-down menu of the "Emulation" field, select "VT100" from the list displayed and click. " Properties" ( is the name entered in Step 2) window appears. (Refer to Figure 4)Ĭlick in main menu of HyperTerminal and select. (Refer to Figure 4) Step 5.Ĭlick the pull-down menu of the "Flow control" field, select "None" and click. On the "COM2 (COM port number varies depending on the environment of the PC to which the console cable is connected) Properties" window, click the pull-down menu of the "Bits per second" field and select "9600". Click the pull-down menu of the "Connect using" field, select the COM port to which the console cable is connected and click. Enter an arbitrary name (for example, test), select an icon and click in the window. With RJ45-DSub9 pin console cable (PN72002)Ĭonnect the Windows PC for operation and the Ethernet Switch with a console cable, and start HyperTerminal along with the following steps:Ĭlick the button on Windows task bar, and select → → → .
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |